365/372 (xt)

TK

Hand Rubbed Pork
Jan 9, 2012
8,808
8,483
113
Maine
www.tkpowerequipment.com
Just the transfer covers. Remove 'em. Grind a foolish little plate off each one. Put 'em back. Adjust carb. 372xt delivered.

I don't charge much for this ridiculously invasive surgery. I guarantee your 365xt will perform like a 372xt when you get it back. For a slight upcharge you can upgrade to a high capacity air filter too. :pirate:
 

parrisw

New Member
Jan 9, 2012
230
141
0
BC, Canada
Cool, was at a local fairly new saw shop to the area, but the guy has been around a long time, he had a good old 372xp on the shelf and said he could still get more.
 
  • Like
Reactions: 1 person

TK

Hand Rubbed Pork
Jan 9, 2012
8,808
8,483
113
Maine
www.tkpowerequipment.com
Cool, was at a local fairly new saw shop to the area, but the guy has been around a long time, he had a good old 372xp on the shelf and said he could still get more.
He must be ordering from another dealer who bought em by the truckload, there's no option when ordering new ones through the warehouse as to what you want....


Can you guys get more out of a strato saw than a traditional setup? I know stock for stock they have a bit of a boost but how about under the knife?
 
  • Like
Reactions: 1 person

parrisw

New Member
Jan 9, 2012
230
141
0
BC, Canada
He must be ordering from another dealer who bought em by the truckload, there's no option when ordering new ones through the warehouse as to what you want....
That's what I thought too, and that's what I told him. But he said he can get them in Canada for about another year. Its Walkers saw shop, most have heard of them, he's been a husky dealer longer then I've been alive so I'm sure he's not bullcrappin me.
 

TK

Hand Rubbed Pork
Jan 9, 2012
8,808
8,483
113
Maine
www.tkpowerequipment.com
That's what I thought too, and that's what I told him. But he said he can get them in Canada for about another year. Its Walkers saw shop, most have heard of them, he's been a husky dealer longer then I've been alive so I'm sure he's not bullcrappin me.
Ah yes, Canada. I've heard they can't even get the new XT's either 365 or 372. I've heard of Walker, saw a 394/395 at a Maine GTG last fall that was Walkerized, and that muffler was just plain devilish. I liked it to say the least.
 
  • Like
Reactions: 1 person

parrisw

New Member
Jan 9, 2012
230
141
0
BC, Canada
Ah yes, Canada. I've heard they can't even get the new XT's either 365 or 372. I've heard of Walker, saw a 394/395 at a Maine GTG last fall that was Walkerized, and that muffler was just plain devilish. I liked it to say the least.
Yep, we are always on the end of the line for new stuff to get here. The newest saw he had there was a autotune 576. He was telling me about this great new model coming out soon, the 562. LOL, I'm like ya, I know all about it, you can get them in the states ya know! LOL
 
  • Like
Reactions: 1 person

TK

Hand Rubbed Pork
Jan 9, 2012
8,808
8,483
113
Maine
www.tkpowerequipment.com
Yep, we are always on the end of the line for new stuff to get here. The newest saw he had there was a autotune 576. He was telling me about this great new model coming out soon, the 562. LOL, I'm like ya, I know all about it, you can get them in the states ya know! LOL
LOL ya we've had them here since way back... ummm...... last Thursday!!!! :party: Ya I got the short end of that deal, one of the last few here to get them. I really like the saw, though, not gonna lie.
 
  • Like
Reactions: 1 person

Wigglesworth

autotune gives me a pop-up
Jan 9, 2012
1,604
2,753
0
38
West Kentucky
Just the transfer covers. Remove 'em. Grind a foolish little plate off each one. Put 'em back. Adjust carb. 372xt delivered.

I don't charge much for this ridiculously invasive surgery. I guarantee your 365xt will perform like a 372xt when you get it back. For a slight upcharge you can upgrade to a high capacity air filter too. :pirate:
Do they have a part # fo Just the transfer covers? Just wondering if u could just swap em out...
 

blsnelling

Slower than stock porting specialist
Jan 10, 2012
127
166
43
So the cylinders actually the same? Amazing! I hadn't followed this closely before. Talk about a no brainer!
 

NORMZILLA44

New Member
Jan 10, 2012
445
208
0
Hopland Ca. The badlands
That's what I thought too, and that's what I told him. But he said he can get them in Canada for about another year. Its Walkers saw shop, most have heard of them, he's been a husky dealer longer then I've been alive so I'm sure he's not bullcrappin me.
Yep I have heard of them for years. Legendary almost sent them my 044, when it was near fresh. Only thing that stopped me was money. So what are you guy's saying no more 372xp?
 

parrisw

New Member
Jan 9, 2012
230
141
0
BC, Canada
Yep I have heard of them for years. Legendary almost sent them my 044, when it was near fresh. Only thing that stopped me was money. So what are you guy's saying no more 372xp?
Ya 372xp is no longer, I suspect its just remaining stock?? Now its the 372xt.
 

parrisw

New Member
Jan 9, 2012
230
141
0
BC, Canada
Cool. I got a XPW on the way. Not new though. New saws are cool, but not piratical for me. Doesn't take long to look used anyway.
 

MacLaren

New Member
Jan 9, 2012
149
44
0
Bummer, well hope the xt is as good, but I am hearing some say it is not. I wanted a 372xpw 75cc, but I am happy with my xp love that saw.
An excellent source (spike60) as well as others told me they run awesome. Nippin on the heels of an xpw. I would bet they are real runners. I would like to get the 2166 someday and convert it to a 2172........:pirate:
 
Thread starter Similar threads Forum Replies Date
dieselfitter Wanted Junk Husqvarna 365 372 Crankshafts Wanted 26
W Husky 365/372 question.. Woodz Porting & Saw Buildz 7
Jimmy in NC 365/372 HD Filter - Convert Low Top to High Top Wanted 2
W Huztl 52mm Big Bore (75cc's) vs. Husqvarna 365 / 372 Hybrid & some comments on this series Woodz Porting & Saw Buildz 2
W Huztl Aftermarket parts for 365/372 series Husqvarna's Hawgz Garage 12
BloodOnTheIce Aftermarket Husky 372, 365 Stihl MS440, MS390 Pistons and rings For Sale 2
jacob j. 362/365/372/372 crankcase Wanted 3
Cut4fun Trade 268 clutch cover for 365 372 clutch cover Wanted 1
mweba How to change a 365 x torque into a 372 Hawgz Garage 16
M 365 X-torq/372XP hybrid? Chainsawz 12
T New OEM 365 clutch cover For Sale 2
Termitebuffet 365 Arky Magnum Xpee Woodz Porting & Saw Buildz 98
Chity_Avatar Poulan Pro 365 For Sale 1
W What to do with an old Open port 365 with a Walbro carb, came with a Zama Woodz Porting & Saw Buildz 14
N Newbie to Husky got 365 runnin lean problem Chainsawz 6
P husky 365 cylinder, piston and rings OEM For Sale 0
WoodChuck'r FOUND - Blown up 365 top end. - FOUND Wanted 2
P husky 365/ jonsered 2165 cyl. & piston For Sale 0
mweba 570 gone? 365 in? Chainsawz 28
F 372 xpw Woodz Porting & Saw Buildz 9
T WTB: 372 full wrap handle Wanted 3
T 372 cylinder cover For Sale 0
T Husky 372 P&C For Sale 4
R Roncoinc chinee 372 BB build Chainsawz 131
stihl for life ported 372 xp Wanted 3
Wigglesworth Husqvarna 372 For Sale 12
naked arborist First 372 extra pee for me Chainsawz 16
F 372 felling dog Chainsawz 1
W A day in the woods! Spike60 & W'dog Run & Discuss Husqvarna 372 Aftermarket Parts Series "Test" saws Woodz Porting & Saw Buildz 11
W Huztle 372 aftermarket build vs a poor Husqvarna 455, which cuts faster? (Video, some cookie ) Woodz Porting & Saw Buildz 5
C I wants a jred 2166, 0r 2171 or husky 372... whats the difference? Chainsawz 32
W Quandry, Huztl 372 "Big Bore" build Woodz Porting & Saw Buildz 16
Chity_Avatar Husky 372 question Chainsawz 34
jrcat WANTED 2 full wrap handles for 371/372 Wanted 0
Chainsawwhisperer Looking for 372 parts... Wanted 8
komatsuvarna WTB 372 case Wanted 2
Termitebuffet 372 xtorq Woodz Porting & Saw Buildz 19
T 372 piston and cylinder? Chainsawz 11
BloodOnTheIce sold - Husqvarna 372 Muffler Gas Race Saw - sold For Sale 12
parrisw 390 vs 372 Woodz Porting & Saw Buildz 16
parrisw stock441/ ported 372 comparison Woodz Porting & Saw Buildz 14
Similar threads