Excessive piston wear

mweba

Well-Known Member
Jan 10, 2012
3,251
4,359
113
Iowa
This thread may not have much of a purpose other than to show how worn an engine can get and still run. I have seen some pretty bad ones as I'm sure you all have as well. This one is out of a ms310 that paid for itself five times over. Goes to show, if it doesn't lean out and or stick a ring, they will keep on a truckin.
 

mweba

Well-Known Member
Jan 10, 2012
3,251
4,359
113
Iowa
Pics would help:banghead:

 
  • Like
Reactions: 2 people

Metals406

346 and 372 spikes coming soon. PM me for details.
Jan 9, 2012
6,285
38,043
113
NW Montana
I've seen a few with a sharpened intake skirt like that!

I've also run some saws that were pretty low comp and they still ran. . . Not well mind you, but ran.

I have a 66 here from a local Timberbeast. It cut 1,000 loads it's first year, then was a backup for 8-9 more years. The cylinder coating was completely gone on the intake side!

Like ya say, that saw didn't owe him a thing!
 
  • Like
Reactions: 1 person
Similar threads
Thread starter Title Forum Replies Date
Brad2185 WTB Stihl ms291 jug and piston Wanted 4
N Revisiting aftermarket Cylinder and piston kits Chainsawz 18
R Wanted : good used/new OEM Stihl 056 magnum II piston-56mm Wanted 0
T Meteor 064 Piston (new) For Sale 6
T Jred 910 piston Chainsawz 3
T New 038 piston & AM piston For Sale 0
DefinitiveDave piston and cylinder diagnosis Chainsawz 10
BloodOnTheIce New Stihl piston pricing. Chainsawz 12
N Best piston choice for 084 60mm piston . Had a Golf bust on a saw !! Chainsawz 21
Adirondackstihl 039 Piston Wanted 3
H Stihl 046 post piston change questions Chainsawz 5
fossil Piston with window and without Chainsawz 4
L Echo piston question Chainsawz 9
N Meteor piston for MS361 not fitting right..help! Chainsawz 7
N Heads up , MS361 Cyl/piston kits $15.99 Chainsawz 0
BloodOnTheIce Jonsered 2045 Piston and Cylinder Wanted 1
P looking for a good stihl 362 piston Wanted 0
Chity_Avatar Good oem Stihl MS390 piston needed Wanted 0
N HELP !! Any chance there ia a 52mm piston for a MS650 out there ? Wanted 8
Chity_Avatar Stihl 290 and 390 piston question Chainsawz 4
C SAW 017 husky piston question? Chainsawz 1
Duke Thieroff Husqvarna 371 New OEM Piston! PHO For Sale 11
bplust Piston with a lip on the exhaust side Chainsawz 21
DefinitiveDave piston ID Chainsawz 6
H are there secrets to installing a stihl piston? Chainsawz 12
Whitedogone Piston options for the ms362 Chainsawz 6
BloodOnTheIce Aftermarket Husqvarna 61 Piston For Sale 0
A Piston ring compressor tools for larger clamshells Chainsawz 98
DefinitiveDave How do you clean up and prep an aftermarket piston and cylinder Chainsawz 13
MasterMech 034 Piston Differences Chainsawz 6
Chity_Avatar Topless pictures with my piston haging out Chainsawz 37
Mastermind Thoughts About Having The Husky Closed Port 55 Piston Reproduced.... Chainsawz 25
Chity_Avatar 028 Super piston needed Wanted 1
M Cylinder and piston wanted for a 034 Wanted 26
Adirondackstihl Mystery Mahle piston Chainsawz 18
DSS 44 husky piston Chainsawz 17
RedBeerKitty Looking for a 394xp cylinder/piston Wanted 2
parrisw Husky 51 piston\cylinder, clutch cover Wanted 6
P husky 365 cylinder, piston and rings OEM For Sale 0
BloodOnTheIce Husqvarna 181 Thin Ring Piston & Cylinder & Brand New Rings For Sale 4
T 372 piston and cylinder? Chainsawz 11
BloodOnTheIce New Stihl MS 460 OEM Piston and Rings For Sale 3
mweba Cause of piston damage? Chainsawz 5
BloodOnTheIce Stihl 026 Piston and Cylinder For Sale 4
T 046/ms460 cylinder and piston Wanted 0
B husky piston Wanted 2
P husky 365/ jonsered 2165 cyl. & piston For Sale 0
dastevoe 029 super piston ? Chainsawz 1
dastevoe Alternate 46mm piston ? Chainsawz 0
Magnumitis Watch "Fairies Wear Boots" on YouTube The Razorback Lounge 11

Similar threads