Quantcast

TN GTG/Build Off - June 16th

TLandrum

New Member
Joined
Jan 11, 2012
Messages
301
Reaction score
636
Location
east tn
june 16th TN gtg,4 cube build off ,racing ,general cookie cutting ,food and fun
well here are the days activities. im going to try and make this gtg a little different than my usual gtg.
were going to have plenty of wood for everyone to cut cookies on,all different sizes and species of wood for long bars and short bars,big saws and small saws,old saws and new saws.

this year i plan to have lots of square wood to race in. we will be having races all day long. i plan to have stock saw,stock appearing gas,stock appearing alky,pipe saw,stock chain races,race chain on stock saw races,3,4,5,cube races,open hot saw. you name it we will race it,got a rooster and a saddle we'll race it. this will be cold start ,hot start on ground,hot start over the wood,you name it..if stumpy wants to race in a thong we'll let him.lol anyone that plans to join in the races will need to buy in to help pay for the cants. id say $10 per person to cover the cants.

this year instead of everyone bringing food or us grilling we will be ordering pizza.we will charge $5 per head for food and drink. i think that would be fair. there will be bottled water on ice all day for every one to drink included in the $5.

i will be getting a circus tent again this year for us to get out of the sun or rain . i will be setting up one circus tent over the top of the wood for the cant racing ,so that we can race, rain or shine all day long.anyone that has pop up tents can set it up if they want.

anyone that wants to come early and camp out is welcome. we usually have a bon fire and food the night before. adult beverages are allowed night before gtg and after gtg.ABSOLUTELTY NOT DURING THE GTG.

i hope everyone that wants to attend can make it a point to come and join in this years fun.



build off rules

the saw must fit in the 3.01 to 4.00 cube class

any brand you want to use


1 the saw must be visually stock appearing with all covers in place and no extra holes

2 you can use any piston cylinder combo oem or aftermarket as long as it fits in 4 cube

3 you must use production chainsaw parts for intake (rubber boot or plastic block from a
factory saw produced saw)

4 muffler can not have pipes longer than 3/4 inch

5 you can use any chainsaw carb you wish to use as long as it has a working/functional
choke and true to the saw filter

6 run whatever sprocket you want

7 we will use 16'' bars

8 send the saw with your own choice of brand round ground chain. You can sharpen the
chain and set rakers for the best cut on your saw.

9 no suqare ground chain

10 no chassy work on the chain (no thinning,no dog boning,no tunneling,no stoning ,no
spinnign down rivets)

11 saw must run on 93 octane gas and 32:1 mix

12 saw must be tuned and ready before it gets to the cutting block

13 there will be one designated saw operator

14 there will be 3 down cuts

15 there will be 3 timers,lowest time thrown out last two averaged,best cut of the 3 counts

16 there will be no whining,moaning,generall pain in my arse biotching about the results



THE ENTRY FEE WILL BE $20 PER SAW TO COVER THE CANT AND THE FUEL
 

young

Sup dawg. Mah yooza tytle iz cussum, son.
Joined
Jan 10, 2012
Messages
1,015
Reaction score
1,756
Location
kentucky
:banana::banana::banana::banana:
 

Hedgerow

Mizzurruh Saw Gangsta
Joined
Jan 10, 2012
Messages
13,949
Reaction score
110,682
So I could run any "off the roll" chain and a 16" bar??? Or will the bar be furnished?
 

TLandrum

New Member
Joined
Jan 11, 2012
Messages
301
Reaction score
636
Location
east tn
no bar will be furnished this time. you can use any brand of off the roll round ground chain. sharpen it to your liking set the rakers and lets run it.
 

TLandrum

New Member
Joined
Jan 11, 2012
Messages
301
Reaction score
636
Location
east tn
yep just a week from sat till the shindig fires up. got the cants setting here and all but a few logs. those last 5 logs will be brought home this weekend. now its time to hurry up and wait.
 

Spike60

Well-Known Member
Joined
Jan 12, 2012
Messages
261
Reaction score
519
Did the CMR7H plugs change anything with the 562?
 

TLandrum

New Member
Joined
Jan 11, 2012
Messages
301
Reaction score
636
Location
east tn
ive not noticed any difference in it since i swapped the plug. i got the air leak fixed but it didnt really change much either. it still has a slight off idle hesitation. but none the less it runs and cuts like a striped arse ape.
 

TK

Hand Rubbed Pork
Joined
Jan 9, 2012
Messages
8,808
Reaction score
8,483
Location
Maine
Has this party started yet?
:bananaparty::bananaparty::bananaparty::bananaparty::bananaparty::bananaparty::bananaparty:
 

Hedgerow

Mizzurruh Saw Gangsta
Joined
Jan 10, 2012
Messages
13,949
Reaction score
110,682
Found out a couple things today...
1. Stephen and Wendell are a must at your gtg...
2. My 9010 is one badass cookie cuttin' mutha...
Just sayin...
 

Latest posts

Top