Quantcast

Wigglesworth

autotune gives me a pop-up
Joined
Jan 9, 2012
Messages
1,604
Reaction score
2,753
Location
West Kentucky
That's right folks. March 24th, 2012. The location zip is 42071. Be there or be square!


Gonna be two working class saw build offs.

First is the 064/066/660.

Must be 54mm bore!!
No two piece heads
Stock carbs, fully functioning choke
Air filters installed.
Must have stock muffler, no restrictions on outlets or what not.
Fuel and chain will be supplied. 93 octane non ethonol.

Entry cost will be whatever it cost me for the chain and fuel cost diveded up. I would figure $30ish a piece.
Wood will be 28" approx. so a 32" bar will be needed. If u don't have one, I'm sure someone will share :)

Fastest cut thru the cant wins. The winner will receive his choice of a swift kick in the junk or bragging rights, whichever u prefer....

And also the 346 ex pee

Same basic rules.

No two piece heads
You can run the OE or NE cylinders
Carb, intake and filter must appear stock. 357/359 carbs are ok.
Must have stock muffler, no restriction on outlets or what nots.

Fuel will be supplied.

You supply your chain :)

Chain can be either 3/8 or .325. It must be NEW in the package, and will be inspected prior to running.

Wood will be 10x10 of most likely poplar. Two cuts, one down, one up. Fastest time wins. Same prizes as the 66 Buildoff. :)

So there it is, got lots of time, so y'all better get to building :)
 

StumpysCustoms

Pot-Bellied Pig!
Joined
Jan 10, 2012
Messages
189
Reaction score
102
I should have a 066 in that & maybee a 350 or 346. I'd lve to make it.
PM me the addy so I can mapquest it.
 

young

Sup dawg. Mah yooza tytle iz cussum, son.
Joined
Jan 10, 2012
Messages
1,015
Reaction score
1,756
Location
kentucky
i approve of this thread.:thumbsup::thumbsup::thumbsup:
 

FarmerBoy

Active Member
Joined
Jan 14, 2012
Messages
103
Reaction score
46
Location
one payment away from living in a box
That's right folks. March 24th, 2012. The location zip is 42071. Be there or be square!


Fastest cut thru the cant wins. The winner will receive his choice of a swift kick in the junk or bragging rights, whichever u prefer....

:)

How can you call something this big and hard junk? You better wear you steel toe boots if I win:thumbsup:
 

rms61moparman

New Member
Joined
Jan 12, 2012
Messages
826
Reaction score
1,588
Location
Franklinton, Kentucky
I don't have a 346 expee can I enter my 5300 Redmax???

I don't have an 066 either...can I enter my AK77372?

I just want to have fun and hang out with you big money fellers but my wife wants me to win.
She's hoping a swift kick will make my junk swell up!!!LOL:yup:


Mike
 

young

Sup dawg. Mah yooza tytle iz cussum, son.
Joined
Jan 10, 2012
Messages
1,015
Reaction score
1,756
Location
kentucky
so J, you going host the 7900 build off too?
 

mdavlee

How the heck did this take so long?
Joined
Jan 10, 2012
Messages
227,157
Reaction score
47,585
Well this is getting closer and I still haven't got my saw together for it. I hope to get home in time to get it built and run it some. I would think it's going to be a full day with doing 2 buildoffs in the same day.
 

Wigglesworth

autotune gives me a pop-up
Joined
Jan 9, 2012
Messages
1,604
Reaction score
2,753
Location
West Kentucky
so J, you going host the 7900 build off too?

Whats a Dulmor?

I dunno. Gotta see what wood is available.

Well this is getting closer and I still haven't got my saw together for it. I hope to get home in time to get it built and run it some. I would think it's going to be a full day with doing 2 buildoffs in the same day.

Me neither. Had my 346 apart for 2 weeks and aint done anything to it. :(

My 066 runs at the moment, but I aint touched it either. :(

The 346's wont take long, I dont think. Im still not sure how many saws are gonna be there though.

THe 66's are cutting bigger wood, so who knows how long it will take??
 

young

Sup dawg. Mah yooza tytle iz cussum, son.
Joined
Jan 10, 2012
Messages
1,015
Reaction score
1,756
Location
kentucky
Whats a Dulmor?

I dunno. Gotta see what wood is available.



Me neither. Had my 346 apart for 2 weeks and aint done anything to it. :(

My 066 runs at the moment, but I aint touched it either. :(

The 346's wont take long, I dont think. Im still not sure how many saws are gonna be there though.

THe 66's are cutting bigger wood, so who knows how long it will take??

your right. stick to 346 and 660.:yup::yup:

and.........hurry up:p
 

Work Saw Collector

WorkSaw....?? No. It's TwerkSaw.
Joined
Jan 10, 2012
Messages
1,436
Reaction score
5,498
That's right folks. March 24th, 2012. The location zip is 42071. Be there or be square!


Gonna be two working class saw build offs.

First is the 064/066/660.

Must be 54mm bore!!
No two piece heads
Stock carbs, fully functioning choke
Air filters installed.
Must have stock muffler, no restrictions on outlets or what not.
Fuel and chain will be supplied. 93 octane non ethonol.

Entry cost will be whatever it cost me for the chain and fuel cost diveded up. I would figure $30ish a piece.
Wood will be 28" approx. so a 32" bar will be needed. If u don't have one, I'm sure someone will share :)

Fastest cut thru the cant wins. The winner will receive his choice of a swift kick in the junk or bragging rights, whichever u prefer....

And also the 346 ex pee

Same basic rules.

No two piece heads
You can run the OE or NE cylinders
Carb, intake and filter must appear stock. 357/359 carbs are ok.
Must have stock muffler, no restriction on outlets or what nots.

Fuel will be supplied.

You supply your chain :)

Chain can be either 3/8 or .325. It must be NEW in the package, and will be inspected prior to running.

Wood will be 10x10 of most likely poplar. Two cuts, one down, one up. Fastest time wins. Same prizes as the 66 Buildoff. :)

So there it is, got lots of time, so y'all better get to building :)

Package inspected, sorry I thought that was funny.

I guess I want in on the 066/660. I don't have a 346. Yet :smoking:

Do you need the chain money up front?

If I win I don't want anything but just give the swift kick in the junk to Stumpy.

Edit: I have a 32" bar I would share it if anyone needs it.
 
Last edited:

Latest posts

Top