White Top 50

thomas1

┌∩┐(◣_◢)┌∩┐
Staff member
Oct 22, 2012
23,293
158,848
113
Fredericksburg, Va
#2
Is this sold yet?
 

PogoInTheWoods

Well-Known Member
Nov 1, 2013
1,887
5,234
113
Henrietta Twp., Ohio
#14
It’s been 3 or 4 years but I think it is cylinder for the 55 Husqvarna. May not be 55cc.
That's why I asked. The 46mm top ends are supposedly 53cc (give or take depending on how tight the combustion chamber is). The closed port 45mm top ends are 51cc.

And I'd snatch that up if I had the extra caish.
 
Last edited:

thomas1

┌∩┐(◣_◢)┌∩┐
Staff member
Oct 22, 2012
23,293
158,848
113
Fredericksburg, Va
#16
You're too late, Brad said it sold next Friday.
 

Majorpayne

How's your AC?
Nov 18, 2012
18,662
134,144
113
67
Southern Illinois
#17
That's why I asked. The 46mm top ends are supposedly 53cc (give or take depending on how tight the combustion chamber is). The closed port 45mm top ends are 51cc.

And I'd snatch that up if I had the extra caish.
I have the original cylinder. It had transfer but cleaned up good but I had already bought the Farmertec and Meteor.
 

rocketnorton

Raisin Hater
Sep 29, 2013
9,561
56,866
113
59
surrey bc can
#18
That's why I asked. The 46mm top ends are supposedly 53cc (give or take depending on how tight the combustion chamber is). The closed port 45mm top ends are 51cc.

And I'd snatch that up if I had the extra caish.
did not know combustion chamber volume was figured into displacement.

agreed on 53cc.
 

rocketnorton

Raisin Hater
Sep 29, 2013
9,561
56,866
113
59
surrey bc can
#20
ya, b&s. if ya know combustion chamber volume, then you can figure compression r.
racers wil "cc" heads to get what they want. adjusting squish, cyl height, or separate head are saw versions of that.