Woodz Ported MS261...

BloodOnTheIce

~Ice Gangsta~
Jan 10, 2012
2,043
2,087
113
Parts Unknown
I'm having a MS261 built for my stepdad as a birthday present.

He's got a ton of black walnut to cut since he had his property logged.

And he'll be 65 in a few weeks, and has been drooling over the 261's since they came out.

So I bought one and having it ported this coming week.

It'll be running a 18" bar 3/8" combo, it'll be neat to see one of these ported against the ported 550XP's
 
  • Like
Reactions: 1 person

Hedgerow

Mizzurruh Saw Gangsta
Staff member
Jan 10, 2012
13,611
107,243
113
There's no strato's on that saw just extra places to put fuel. :evilgrin:
That's a good way to get what you're looking for... BAM!!! Quad port Stihl!!! Oh, and you have to PM me too who you're having do the build...
:bananajump:
 

BloodOnTheIce

~Ice Gangsta~
Jan 10, 2012
2,043
2,087
113
Parts Unknown
It'll be back together tonight, and looks like I'm headed over the border to pick it up this weekend.

Pretty good turn around considering I dropped it off Friday night at 8pm.
 

BloodOnTheIce

~Ice Gangsta~
Jan 10, 2012
2,043
2,087
113
Parts Unknown
Looks like mission is accomplished, a good running small light saw with big saw power.
It's got enough power to run a 18" bar and 3/8" chain and cut full bar with a wide power band.
It should make him a good 65th birthday present.

[video=youtube_share;0bKuzORyLQw]http://youtu.be/0bKuzORyLQw[/video]
 
  • Like
Reactions: 5 people

Hedgerow

Mizzurruh Saw Gangsta
Staff member
Jan 10, 2012
13,611
107,243
113
Looks like mission is accomplished, a good running small light saw with big saw power.
It's got enough power to run a 18" bar and 3/8" chain and cut full bar with a wide power band.
It should make him a good 65th birthday present.

[video=youtube_share;0bKuzORyLQw]http://youtu.be/0bKuzORyLQw[/video]
That's a good 65th b day present...
 

BloodOnTheIce

~Ice Gangsta~
Jan 10, 2012
2,043
2,087
113
Parts Unknown
It should give my muffler mod Husky 268 a run for it's money.
That wood was 2 year old 16" x 18 Elm

It's got a stock carb, no flywheel work and most of all it's a work saw
it could be used 6 hours a day and not blow up in big cuts.

I'm headed up tomorrow to pick it up. :bananaskip::bananaskip::bananaskip:
 
  • Like
Reactions: 3 people

BloodOnTheIce

~Ice Gangsta~
Jan 10, 2012
2,043
2,087
113
Parts Unknown
The only issues remaining is likely that it it isn't a well handling saw, and is too large and heavy for a 50cc saw. :rofl:
It's been ported so your stock power to weight ratio is irrelevant, and it cuts nearly as well as a 60cc saw.

So you're point is moot. :facepalm:

Troll, 75% of the time this saw will be bucking firewood 6-16" black walnut primarily.

So sideways balances and "handling" aren't very important since it won't be doing much limbing.

So go piss in someone else cereal.
 
  • Like
Reactions: 1 person

TK

Hand Rubbed Pork
Jan 9, 2012
8,808
8,483
113
Maine
www.tkpowerequipment.com
It's been ported so your stock power to weight ratio is irrelevant, and it cuts nearly as well as a 60cc saw.

So you're point is moot. :facepalm:

Troll, 75% of the time this saw will be bucking firewood 6-16" black walnut primarily.

So sideways balances and "handling" aren't very important since it won't be doing much limbing.

So go piss in someone else cereal.
No no no my cinnamon toast crunch is FINALLY back to normal :(
 
  • Like
Reactions: 1 person
Thread starter Similar threads Forum Replies Date
BloodOnTheIce Ported Husqvarna 51 w/ 55 Rancher top end For Sale 16
thomas1 Ported MS361 For Sale 39
B Ported saw wanted... For Sale 11
thomas1 Ported 395xp For Sale 526
S ported stihl ms 460r For Sale 46
srcarr52 SCARR ported Husqvarna 394XP For Sale 7
F CS2253 Woods Ported by Justin Moody 725$ For Sale 8
Chity_Avatar MS290 vs 034 vs ported 660 Chainsawz 8
Z7extreme Dyno tested.....Mastermind ported 660 vs Stock 660 vs Dual port 660 Chainsawz 29
Z7extreme Dyno tested....461 vs ported 461 Chainsawz 30
Mastermind Mastermind Ported J'Red 2252 For Sale 2
stihl for life ported 372 xp Wanted 3
BloodOnTheIce Husqvarna 254xp hot woods ported Gas Muffler Saw For Sale 2
Chity_Avatar Mastermind ported Stihl 088 for sale or trade For Sale 34
Nuzzy Which ported saw would I have more fun with... Chainsawz 47
Mastermind Uncle Rob's 070 Becomes A Ported 090 Chainsawz 94
Jimmy in NC WTT - Mastermind Ported 288 For Sale 4
mweba Dollar 5105 "professionally" ported Woodz Porting & Saw Buildz 60
Virgil Ported Saw Horse Power Chainsawz 171
komatsuvarna ported Husqvarna 395xp For Sale 35
N how does a stock 395xp compare to a ported ms460? Chainsawz 37
Genius Mastermind ported Husky 350 Wanted 9
srcarr52 Ported Husqvarna 394XP For Sale 13
C whats the correct or best way to mod a jred 2159 muffler? not ported work saw Chainsawz 41
Old Iron Logging Ported 261 Woodz Porting & Saw Buildz 3
P Stihl 660 w/ ported non decomp cyl. For Sale 4
P Stihl 460R ported For Sale 7
Wigglesworth The Official "Ported Saw Vid Thread" Chainsawz 38
naked arborist MS361 ported For Sale 1
Cut4fun SOLD - EHP woods ported Redmax 5000 49.3cc - SOLD For Sale 5
Chity_Avatar Need to get the 660 ported Woodz Porting & Saw Buildz 167
P woods ported husky 257 with 262 top end and 246, also numerous other saw parts For Sale 4
mweba Husqvarna 545 Woods Ported For Sale 22
BloodOnTheIce Ported MS261 vs. Black Walnut Chainsawz 21
mdavlee 10mm 044 ported by mastermind For Sale 1
parrisw stock441/ ported 372 comparison Woodz Porting & Saw Buildz 14
BloodOnTheIce For Sale EHP Stihl MS261 PHO For Sale 0
N MS261 oil pump(s) Wanted 0
hseII Stihl MS261 non CM For Sale 5
BloodOnTheIce Stihl MS261 w/ 18" bar and chain For Sale 1
super3 MS261 Chainsawz 18
Similar threads